The scan cycle of the PLC, what is the scan cycle of the PLC?

When the PLC is in the RUN mode, the time required to perform a scan operation is called the scan period, and its typical value is about 1 to 100 ms.

The plc scan cycle has a lot to do with the length of the user program, the type of instructions, and the speed at which the CPU executes the instructions.

When the user program is long, the instruction execution time accounts for a considerable proportion of the scan cycle.

Some programming software or programmers can provide the current value of the scan cycle, and some can also provide the maximum and minimum scan cycles.

Popular posts from this blog

Mitsubishi FX series PLC high-speed counter (HSC)

The difference between Siemens PLC and Mitsubishi PLC